ATF MHP is a semi synthetic, multi vehicle, red coloured, automatic transmission fluid that exceeds the requirements of Mitsubishi SP2/SP3, DEXRON® IIIH as well as many other manufacturers specifications. It is an advanced formula designed for optimum performance, outstanding high temperature resistance and it provides 3 x times the smooth shift durability over the life of the fluid compared to the industry standard anti shudder test. APPLICATION ATF MHP is suitable for use in 4, 5 & 6 + speed automatic transmissions in passenger cars, 4WD' and light & heavy duty commercial vehicles. It provides for 3 times smooth shift durability for the life of the fluid when measured in a JASO M349 anti shudder test ATF MHP is ideal for use in BTR 4 speed transmissions used by Ford and SsangYong where BTR 91LE/95LE is specified and can be used to replace DEXRON® II or DEXRON® III fluids in all applications that specify this type of product. ATF MHP is particularly suitable for Mitsubishi, Hyundai, Proton & Kia motor vehicles where MM SP, SP2, SP3 or PA fluids are specified and for service-fill in Toyota vehicles that specify Type T-II, Type T-III and Type T-IV. It is also recommended for Holden Astra, Barina, Zafira and Vectra plus other European manufacturers (such as Volvo, Ford and Jaguar) that use Aisin or JATCO automatic transmissions, as well as Chrysler automatic transmissions where ATF+3® or ATF+4® fluids are required. ATF MHP can be used in automatic transmissions, heavy duty automatic transmissions, power steering systems, rotary vane and screw type compressors, hydraulic systems and manual transmissions where GM Dexron® type fluids are specified. Please Note: Not for use in 6 and 8 speed ZF transmissions or 7 speed Mercedes Benz transmissions. Not for use in Direct-Shift or Dual Clutch Gearboxes (DSG/ DCT) or Continuously Variable Transmissions (CVT) Please refer to Penrite Recommendation Guide for the correct applications