Davies, Craig TyreGuard 400 TPMS Tyre Pressure Monitoring System Kit with Four Sensors - 1015

The Tyre / Tire Pressure Monitoring Systems (TPMS) is a universal fit product that allows for constant Monitoring of a vehicle’s Tire Pressure & Temperature.

TYREGUARD 400 TPMS (4 Sensors) KIT (Part #1015)

The Tyre / Tire Pressure Monitoring Systems (TPMS) is a universal fit product that allows for constant Monitoring of a vehicle’s Tyre / Tire Pressure & Temperature.  The system can receive wireless information from up to 22 wheels or 4 wheels with a pressure range of 0 to 145 psi and operating distance of 16 meters with the use of a booster or 8 meters without.

*Note: the kit comes with 4 sensors only. We also have the following kits:

• 6 sensor kit (part #1017)
• 8 sensor kit (Part #1019)
• Additional sensors available in packs of 2 (Part #1016) or individually (Part #1011)

 After programming the ideal psi for each tire into the monitor, a transmitter is attached to each wheel’s valve stem in sequence. Various Levels of warnings are issued for pressure changes (under & over), high temperatures and low battery status.

Additional Features:

• Trailer disconnect function: Stops Trailer sensors from showing errors when disconnected
• Dual pressure function: Provides Standard and Low-pressure settings
• Force Update: Zeros all pressure readings
• Delete all sensors: Clears all sensor alignments

Alarm Notifications:

1. Rapid leak: Pressure drops more than 3 Psi in 2 minutes  
2. Slow leak: Pressure drops more than 3 Psi in 2 - 10 minutes  
3. Low pressure level 1: Pressures falls below 85% set pressure
4. Low Pressure level 2: Pressures falls below 75% set pressure
5. Low Pressure level 3: Pressures falls below 50% set pressure
6. High Pressure level: Rise 120% above set Pressure
7. High temperature: Above 65C (149F) and 75 C (167F)
8. Loss of Signal: monitor does not receive sensor signal for 30 minutes 

TPMS Sensor Protective Tip

To help protect your vehicle’s Sensors and caps from stone damage & tapping on the wheel rim which may fracture the Sensor battery cradles,  a piece of ½” heater hose fits snugly over the cap and valve stem with the small amount of the cap protruding. This is a very economical and successful option to place on all Sensors.

Easy-to-read hand-held monitor

Lightweight valve-mounted sensors for pressures to 145psi

Simple DIY installation. Supports up to 22 tyres

6x 3V CR1632 batteries supplied

Sensors simply screw onto the valve stems (Schrader type only)

12 months